back diode detector with replaceable diodes 2085 series m/a-com, inc. north america: tel. (800) 366-2266 n asia/paci?: tel. +81 (03) 3226-1671 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +81 (03) 3226-1451 fax +44 (1344) 300 020 1 speci?ations subject to change without notice. speci?ations bias current 0 output polarity negative 4 video resistance 80 ohms nominal 2 maximum power 40 mw cw or 3 erg spike (except 2085-6018-00) 2085-6018, 25 mw cw or 2 erg spike temperature stability ? db over operating range of ?5? to +100? tracking 0.5 db (matched pair) per octave band (except 2085-6018-00) 2085-6018-00, 0.8 db (matched pair) per octave band 5 temperature range ?5? to +100? finish passivated stainless steel mechanical outline typical extended band performance open circuit voltage tangential flatness 1 sensitivity 2 sensitivity 3 output replacement frequency typical vswr 1 (mv/mw) (-dbm) capacitance dimension a diode detector range (ghz) ( db) typical typ. min. typ. min. typical (pf) inches (mm) part number part number 1.0-18.0 1.5 4.0 500 400 47.0 46.0 12 1.35 (34.3) 9999-4018-00 2085-6010-00 1.0-2.0 0.2 2.5 780 700 53.0 52.0 18 1.35 (34.3) 9999-4018-00 2085-6013-00 2.0-4.0 0.3 1.8 840 750 53.5 52.5 18 1.55 (39.4) 9999-4028-00 2085-6014-00 4.0-8.0 0.4 2.5 610 525 52.0 51.0 12 1.55 (39.4) 9999-4029-00 2085-6015-00 8.0-12.4 0.5 2.0 640 550 52.5 51.5 12 1.55 (39.4) 9999-4030-00 2085-6016-00 12.4-18.0 0.5 2.5 600 500 52.0 51.0 9 1.55 (39.4) 9999-4031-00 2085-6017-00 open circuit flatness 1 voltage tangential output frequency typical vswr 1 sensitivity 2 sensitivity 3 capacitance detector range (ghz) ( db) typical typical (mv/mw) (-dbm) typical (pf) part number .85-6.0 1.0 3:1 500 50.0 18 2085-6013-00 1.4-5.0 1.0 3:1 500 50.0 18 2085-6014-00 3.9-9.5 1.0 3:1 500 50.0 12 2085-6015-00 6.5-14.0 1.0 3:1 400 49.0 12 2085-6016-00 2.7-18.5 1.0 3:1 400 49.0 9 2085-6017-00 notes: 1. for rf power levels below -20 dbm, and with 1,000 ohm load. 2. for rf power levels below -20 dbm. 3. with video ampli?r of 1 mhz bandwidth, and 2 db noise ?ure. 4. consult factory for positive output or matched pairs. v2.00
|